Driving modes and rigging for on-road driving
6.6 Installing/removing the outrigger beams
Operating manual 3 302 709 en 6 - 57
GMK5150L
12.01.2018
6.6.5 Preparations – on the truck crane
Prerequisites The following requirements must be met before mounting/removing the
outrigger beams:
– All rigging work which involves slewing the superstructure has been
completed.
– The parking brake is engaged.
– The truck crane has been levelled with the level adjustment system;
à p. 5 - 53.
– The suspension is switched off (blocked), and the symbol (1) is red;
à p. 5 - 16.
– The corresponding covers have been removed (1).
To Next Page
Loading...
Need help?
General
