Malfunctions in driving mode
8.5 Emergency operation and breakdown assistance
8 - 38 3 302 709 en Operating manual
GMK5150L
12.01.2018
Inflating the tyres The maximum operation pressure of the compressed air system of 10 bar
(145 psi) can only be reached with the engine running.
• Start the engine; à p. 4 - 13.
• Fasten the tyre connection (1) to the tyre
valve.
• Press the button on the tyre connection and
inflate the tyre.
• Disconnect the tyre connection (1) from the
tyre valve.
Remove the
filling hose
Before driving, you must remove the tyre filling hose from the tyre inflator
connection.
• Remove the connection (1) from the filler
connection (2).
• Close the filler connection and the connec-
tion with the caps (2) and (4).
• Stow the filling hose away.
• Drive to a service station or repair shop and
adjust the tyre pressure.
S
Risk of damage to the compressed air system
Always close the filler connection with the cap.
This prevents damage to the compressed air system and contamination
of it.
To Next Page
Loading...
Need help?
General
