Matrix ETERNITY GE User Manual

Matrix ETERNITY Quick Start 63
• You can also assign Voice Modules with different DID Greeting messages.
Refer the topic Voice Message Applications in the System Manual to know
more.
CLI Based Routing
• You can land particular calling party numbers on particular destinations, by
programming the desired destination in the CLI-Based Routing Table. By
default this table has no entries (blank).
• Go to ‘CLI Based Routing’ to program the desired destination - Destination Type
and Port Number - for particular calling number.
DDI (Direct Dialing In)
• For DDI, you must assign IC Reference ID and OG Reference ID to T1E1 Port
for working hours, break hours and non-working hours. To do this go to ‘DDI
Routing’.
• Click the links of the ‘DDI Routing’, viz. ‘IC Reference Table’, ‘DDI Routing
Table’ and ‘Outgoing Reference Table’ to program DDI Routing.
• To know more about DDI Routing, refer the System Manual.
Trunk Auto Answer
• By default Trunk Auto Answer is disabled on all the trunks for working hours,
break hours and non-working hours.
• To enable Trunk Auto Answer for working, non-working and break hours, go to
‘Trunk Feature Template’ of the trunks on which this feature is to be enabled.
• You may also assign voice modules for Trunk Auto Answer Greeting messages,
Auto Answer RBT message, and Auto Answer Bye message. Refer the topic
Voice Message Applications in the System Manual to know more.
DISA
• By default Direct Inward System Access (DISA) is disabled on all the trunks for
working hours, break hours and non-working hours.
• To enable DISA for working, non-working and break hours, go to ‘Trunk Feature
Template’ of the trunks on which this feature is to be enabled.

Matrix ETERNITY GE Specifications

General

Brand	Matrix
Model	ETERNITY GE
Category	PBX
Language	English