Mercedes-Benz Vito User Manual

Menus
The adjusting knobs
,, ., 5 or 0 can
be used to select the following functions:
I
Call up the service due date
I
Check the engine oil level (e page 254)
I
Select/set the auxiliary heating
switch-on time (
e page 168)
I
Set the time (e page 103)
I
Select the units for the outside temper-
ature (
e page 103)
I
Select the units for the distance
(
e page 103)
E To return to the standard display:
press the menu button
5 for longer
than 1 second.
or
E Do not press any button for 10 sec-
onds.
The display accepts the changed set-
tings.
Setting the time
E Turn the key to position 2 in the igni-
tion lock.
E Press menu button 5 repeatedly until
the hours figure flashes.
E Press , or . to set the hours.
E Press reset button 4.
The minute display flashes.
E Press , or . to set the minutes.
i If you keep the , or . button pressed,
the reading will change continuously.
Selecting the units for the outside tem-
perature
E Turn the key to position 2 in the igni-
tion lock.
E Press menu button 5 repeatedly until
the outside temperature and the tem-
perature units of measurement flash.
E Press , or . to select the tempera-
ture display in degrees Celsius (°C) or
Fahrenheit (°F).
Selecting the units for the distance
The selected distance units are used for:
I
Total distance recorder
I
Trip meter
I
Digital speedometer
I
Speedtronic
E Turn the key to position 2 in the igni-
tion lock.
E Press menu button 5 repeatedly until
the value and the distance units of
measurement flash.
E Press , or . to select whether the
distance is shown in kilometres (km) or
miles.
Controls
On-board computer without steering wheel buttons - version A
103
3
Nur fuer internen Gebrauch

Mercedes-Benz Vito Specifications

General

Brand	Mercedes-Benz
Model	Vito
Category	Automobile
Language	English