Mercedes-Benz Vito User Manual

The switches for all side windows are lo-
cated on the door control panel.
1 Power window, left
2 Power window, right
E Make sure that the key is in position 2
in the ignition lock.
E To open/close: pull or press and hold
switch
1 or 2 until the window has
reached the desired position.
i If you press the switch beyond the pressure
point and then release it, the window opens au-
tomatically. To stop the window, pull or press
the switch again.
Resetting the side windows
The side windows must be reset if the bat-
tery has been disconnected.
E Pull the two power-window switches
until the side windows are closed.
E Hold the switches in this position for
about one second.
The side windows are reset.
Sliding windows
1 Catch
G
Risk of injury
Make sure that nobody can become trapped
as you operate the sliding window or the
sliding door with sliding window.
Remove the key from the ignition lock even
if you are only leaving the vehicle for a short
time.
Never leave children unsupervised in the ve-
hicle.
E To open: press the two catches 1 to-
gether and move the sliding window to
the desired position.
E To close: press the two catches 1 to-
gether and close the sliding window.
The catches must engage audibly.
Hinged windows
G
Risk of injury
Make sure that nobody can become trapped
as you close a hinged window.
Remove the key from the ignition lock even
if you are only leaving the vehicle for a short
time.
Never leave children unsupervised in the ve-
hicle.
Controls
Opening and closing
75
3
Nur fuer internen Gebrauch

Mercedes-Benz Vito Specifications

General

Brand	Mercedes-Benz
Model	Vito
Category	Automobile
Language	English