E Fold tensioning element 2 up to
slacken straps
3 .
E Unclip hook 4 of straps 3 at the bot-
tom on the lashing eyelets
5 .
E Unclip the load protection net from
upper retainers
1 .
E Refit load compartment cover, if neces-
sary.
E Roll up the load protection net and fas-
ten it, still rolled up, using the Velcro
fasteners.
E To adjust the front seat with the
load protection net installed: fold
tensioning element
2 on the straps
up to slacken the load protection net.
E Adjust the front seat as required
(
e page 81).
E Retension the load protection net.
Load protection grille
You can fit the load protection grille be-
hind the front seats.
G
Risk of injury
Fit the load protection grille as described
below. Make sure all securing screws are
correctly tightened.
The load protection grille is not able to hold
back heavy or pointed loads. For this rea-
son, you should always tie them down.
Objects that are not correctly secured could
otherwise be thrown around if you have to
apply the brakes fully, change direction sud-
denly or drive on poor road surfaces thereby
injuring yourself or others.
G
Risk of injury
When the load protection grille is fitted, the
row of seats behind it must not be occupied.
Vehicle occupants on these seats could oth-
erwise make contact with the load protec-
tion grille and sustain injuries in the event
of an accident, even if seat belts are worn.
Full-height load protection grille
The full-height load protection grille is se-
cured by screws to the cross member be-
hind the front seats and to the roof.
1 Lower retainers
2 Securing screws
E To remove: first undo lower securing
screws
2.
Operation
Transporting loads with the vehicle
224
4
Nur fuer internen Gebrauch
To Next Page
Loading...
Need help?
General
