Operation menu
With
j or k you can select the fol-
lowing functions in the operation menu:
I
Trip meter and total distance recorder
(standard display) (
e page 124)
I
Display the coolant temperature
(
e page 124)
I
Call up the service due date
I
Tyre pressure monitor (e page 185)
I
Check the engine oil level (only for ve-
hicles with diesel engine) (
e page 254)
Standard display
In its basic state, you will see the total dis-
tance recorder and the trip meter in the
upper part of the display. This is referred
to as the standard display.
Use the buttons on the steering wheel.
E Press è or · repeatedly until
the standard display appears.
1 Trip meter
2 Total distance recorder
3 Outside temperature or digital speed-
ometer
4 Time
5 Selector lever position or current shift
range with automatic transmission
Displaying the coolant temperature
Use the buttons on the steering wheel.
E Press è or · repeatedly until
the standard display appears.
E Press j or k to select the cool-
ant temperature.
The temperature displayed may climb to
120 °C when the vehicle is being driven in
normal conditions and if the coolant con-
tains the correct concentration of corro-
sion inhibitor and antifreeze. It is accept-
able for the coolant temperature to rise to
the end of the scale at high outside tem-
peratures and when driving in mountain-
ous terrain.
Audio menu
You can use the functions in the Audio
menu to control the audio equipment that
you have just switched on.
If no audio equipment is switched on, you
will see the
AUDIO off (Sound 5 or
Sound 20) or
AUDIO off (Sound 50 APS or
COMAND APS) message.
Selecting a radio station
Use the buttons on the steering wheel.
Controls
On-board computer with steering wheel buttons - version B
124
3
Nur fuer internen Gebrauch
To Next Page
Need help?
General
