Use the buttons on the steering wheel.
E Press the è or · button repeat-
edly until the
Settings menu appears
in the display.
E Press j to go to the submenu se-
lection.
E Press æ or ç to select the Vehi-
cle
submenu.
E Press j to select the Search func-
tion.
The current setting is highlighted.
E Press æ or ç to determine how
the radio searches for stations.
Convenience submenu
Key-dependent settings
You can use the
Key function to determine
whether the settings in the:
I
Instrument (instrument cluster)
I
Driv. lights
I
Vehicle
submenus are stored as key-dependent
settings.
Use the buttons on the steering wheel.
E Press the è or · button repeat-
edly until the
Settings menu appears
in the display.
E Press j to go to the submenu se-
lection.
E Press æ or ç to select the Com-
fort
submenu.
E Press j to select the Key function.
The current setting is highlighted.
E Press æ or ç to activate or deac-
tivate key dependency.
i For safety reasons, it is not possible to set
the
Key function while the vehicle is in motion.
You will see the following message in the dis-
play:
Setting only possible at standstill!
Trip computer menu
You can call up or reset statistical data re-
lating to your vehicle in the trip computer
menu.
Consumption statistics after start
Use the buttons on the steering wheel.
i When you call up the trip computer again,
it displays the last function which you called
up.
E Press the è or · button repeat-
edly until the message
After start ap-
pears in the display.
1 Distance driven since start
2 Time elapsed since start
3 Average speed since start
4 Average fuel consumption since start
Controls
On-board computer with steering wheel buttons - version B
134
3
Nur fuer internen Gebrauch
To Next Page
Loading...
Need help?
General
