Mercedes-Benz Vito User Manual

E To switch on: press the $ switch
in the control panel of the automatic
climate control (
e page 161).
The
$ symbol appears in the dis-
play.
E To switch off: press the $ switch
in the control panel of the automatic
climate control.
The indicator lamp in the switch goes
out.
The control panel in the
side section of the roof is deactivated.
Setting the airflow
E Set airflow control 1 in the side sec-
tion of the roof to the required level.
The symbols on the airflow control have
the following meanings:
Symbol Meaning
ß Basic airflow setting
Q Maximum airflow
U Automatic ventilation control
Setting the temperature
Only change the temperature in small in-
crements.
i As the basic settings, Mercedes-Benz rec-
ommends that you keep temperature selector
control
2 in the middle and airflow control 1
set to U.
The air is directed automatically:
I
to the footwells (heating mode)
I
to the roof area (cooling mode)
The temperature for the rear automatic climate
control can only differ from the set automatic
climate control temperature by a limited
amount.
E To increase the temperature: turn
temperature selector control
2 in the
side section of the roof clockwise.
Warm air flows from the outlets in the
footwell.
E To reduce the temperature: turn tem-
perature selector control
2 in the side
section of the roof anti-clockwise.
Cold air flows from the outlets in the
roof area.
Rear air vents
The rear air vents for the cooling system
are located in the rear compartment, on
the right-hand side section of the roof
when viewed in the direction of travel.
1 Thumbwheel
2 Swivelling air vent
E Set the airflow using thumbwheel 1.
E Control the air distribution using swiv-
elling air vent
2.
Controls
Climate control
165
3
Nur fuer internen Gebrauch

Mercedes-Benz Vito Specifications

General

Brand	Mercedes-Benz
Model	Vito
Category	Automobile
Language	English