I
If TIREFIT comes into contact with your
eyes or skin, immediately rinse thor-
oughly with clean water.
I
Change out of clothing which has come
into contact with TIREFIT immediately.
I
If an allergic reaction occurs, consult a
doctor immediately.
Keep TIREFIT away from children.
I
If TIREFIT is swallowed, immediately
rinse your mouth out thoroughly with
water and drink plenty of water.
I
Do not induce vomiting. Consult a doc-
tor immediately.
I
Do not inhale TIREFIT fumes.
1 TIREFIT sealant bottle
2 Filler hose
E Shake TIREFIT filler bottle 1.
E Screw filler hose 2 on to TIREFIT filler
bottle
1.
The TIREFIT sealant bottle is now open.
i Always hold the TIREFIT sealant bottle with
the opening pointing upwards.
1 TIREFIT sealant bottle
2 Filler hose
3 Filler hose cap
4 Valve core extractor
5 Valve core
6 Valve
E Unscrew the valve cap from valve 6.
E Unscrew valve core 5 from valve 6
using valve core extractor 4.
Place valve core
5 on a clean, dry sur-
face.
E Pull hose cap 3 from filler hose 2.
E Connect filler hose 2 to valve 6.
E Hold TIREFIT filler bottle 1 with the fill-
er hose downwards.
Make sure that the TIREFIT filler bottle
is higher than valve
6.
E Squeeze the TIREFIT filler bottle well
several times until the entire contents
are transferred to the tyre.
E Pull filler hose 2 off.
E Screw valve core 5 firmly into valve
6 using valve core extractor 4.
i If the old valve core is dirty or faulty, use
the valve core provided with the valve core ex-
tractor.
E Close filler hose 2 with hose cap 3.
i If tyre sealant has leaked out, leave it to
dry. It can then be removed like a layer of film.
E Drive the vehicle forwards or back-
wards approximately 10 m.
The tyre sealant distributes throughout
the tyre.
E Remove the electric air pump from the
stowage compartment.
Practical advice
Tyres and wheels
318
5
Nur fuer internen Gebrauch
To Next Page
Loading...
Need help?
General
