Mercedes-Benz Vito User Manual

i After serious malfunctions or if the battery
has been disconnected, close the sliding door
fully once.
Opening/closing using the switch
Observe the notes on anti-entrapment pro-
tection (
e page 70).
Sliding door switch on the centre console
1 To close the sliding door/to program
the key
2 To open the sliding door
Sliding door switch in the doorway
3 To open/close the sliding door
E To open: briefly press the lower sec-
tion of switch
2 on the centre console
or the switch in doorway
3.
The indicator lamp in the switch
flashes. The sliding door unlocks and
opens.
E Again briefly press the lower section of
switch
2 on the centre console or the
switch in doorway
3.
The sliding door stops moving.
i If you have stopped the sliding door before
it was fully open by pressing a control during
opening, the sliding door will be closed the next
time the sliding door is operated using the
switch in the doorway or the remote control in
the key.
E To close: briefly press the upper sec-
tion of switch
1 on the centre console
or the switch in doorway
3.
The indicator lamp in the switch
flashes. The sliding door closes and
you will hear a signal.
E Again press the lower/upper section of
the switch on the centre console or the
switch in doorway
3.
The sliding door stops moving.
Proceed as follows in the event of unfav-
ourable operating conditions, e.g. frost,
ice or heavy dirt:
E To open: press and hold the lower sec-
tion of switch
2 on the centre console
or the switch in doorway
3.
The indicator lamp in the switch
flashes. The sliding door unlocks and
opens.
E Release switch 2 on the centre con-
sole or the switch in doorway
3 once
the sliding door has reached the de-
sired position.
The sliding door stops moving.
Controls
Opening and closing
69
ee
3
Nur fuer internen Gebrauch

Mercedes-Benz Vito Specifications

General

Brand	Mercedes-Benz
Model	Vito
Category	Automobile
Language	English