MG Hector User Manual

127126
Rear Windshield Defroster Button*
To turn on the rear windshield defroster, first
turn on the ignition switch and then press the
rear windshield defroster button. The
instrument on the button will illuminate.
Please turn off the defroster after your view
becomes clear.
If you use the rear windshield defroster
under these circumstances, the vehicle
battery can become under voltage.
Lack of proper maintenance may cause
damage to the defroster or scratches on
the glass.
It is not allowed to use any sharp cleaner
or that prone to cause glass wear to clean
the rear windshield.
Dur in g v ehi cle cl ea nin g o r w hen
operating near the rear windshield,
please take care not to shake or damage
the defroster wire.
If the driver’s view is affected, an accident
can happen, causing personal injuries,
damage to the vehicle or property loss.
Usage of the rear windshield defroster is
p r o h i b i t e d u n d e r t h e f o l l o w i n g
circumstances:
• The engine is not running.
• Snow or ice has deposited on the rear
windshield.
Caution
HVAC
Air Conditioning System
Refrigerating device of the air conditioning
system is used to cool down the inside air and
remove the moisture and dust contained in
the air.
If the temperature control knob is already set
to a comparatively high temperature, warm air
will be generated inside the vehicle even
though the air conditioning refrigeration
(A/C) function is activated.
Air Conditioning (A/C) Button
To turn on the air conditioning (A/C) system:
1. Start the engine.
2. Press the air conditioning (A/C) button.
The button indicator illuminates, indicating
that the air conditioning system is working.
3. Adjust the fan speed.
To turn off the air conditioning system:
Press the A/C button again to make sure that
the A/C stops refrigerating.
If the air conditioning system was kept on
when the engine was shut down the last time,
the system will turn on automatically as the
vehicle is started next time.
You may feel tired and sleepy after long-
time driving in the internal circulation
mode, so please switch to the external
mode on a regular basis to acquire fresh air.
Caution
After the air conditioning system is
turned on, you can find water drops in the
lower area of the engine compartment.
The water drops are formed as moisture
in the air condenses on surface of the air
conditioning system component, which is
a normal phenomenon.
Note
As the air conditioning compressor
works, it consumes certain engine
power. This is the reason why you may
find that the vehicle power performance
decreases when the air conditioning
refrigeration function is activated.
Note
Cool Air
The air conditioning system cannot work
if the fan control thumbwheel is turned
to OFF position.
Note
Fast Cooling
To cool down fast in scorching hot days or
after the vehicle is kept under the blazing sun
for a long time:
1. Open the door windows a little to expel
the hot air inside.
2. Turn on the air conditioning (A/C) system.
(The indicator illuminates at this time.)
3. Activate the internal circulation mode.
4. Switch the air distribution mode to face
mode ( ).
5. Adjust the temperature to the maximum
coolness.
6. Adjust the fan speed to the maximum.
Normal Cooling
1. Turn on the air conditioning (A/C) button.
(The indicator illuminates at this time.)
2. Activate the internal circulation mode.
3. Switch the air distribution mode to face
mode ( ) or dual mode ( ).
4. Adjust the temperature to the cool air area.
5. Adjust the fan speed to the desired value.
HVAC
Rapid Heating
Activate the rapid heating mode to increase
the passenger area temperature quickly. It is
prohibited to activate this mode for a long
time, otherwise the inside air quality will
decrease and fog can form on the windows. To
clear up the fog on the windows, turn off the
internal circulation mode so that fresh air
enters inside.
To acquire the warmest air:
1. Turn off the air conditioning (A/C) system.
(The indicator goes out at this time.)
2. Activate the internal circulation mode.
3. Switch the air distribution mode to foot
mode ( ).
4. Adjust the temperature to the maximum
warmness.
5. Adjust the fan speed to the maximum.
Normal Heating
1. Turn off the air conditioning (A/C) system.
(The indicator goes out at this time.)
2. Activate the external circulation.
3. Switch the air distribution mode to foot
mode ( ) or dual mode ( ).
4. Adjust the temperature to the warm air
area.
5. Adjust the fan speed to the desired value.
Warm Air

MG Hector Specifications

General

Brand	MG
Model	Hector
Category	Automobile
Language	English