MG Hector User Manual

3130
KEYS, DOORS AND WINDOWS
To slide close the sunroof, push the sunroof
switch forward, and release the switch when
the sunroof reaches the desired position. To
completely close the sunroof, release the
switch when the sunroof stops moving. You
can also push the sunroof switch forward once
quickly (short press), and the sunroof will be
slided close automatically.
One-button Opening or Closing
Push the switch once quickly (short press)
while operating the sunroof switch, and the
s u n r o o f c a n b e c l o s e d o r o p e n e d
automatically.
In the process of opening, push the switch
backward once quickly (short press) to tilt
open the sunroof; push again to slide open the
sunroof.
In the process of closing, push the switch
forward once quickly (short press), and the
su n r oo f w il l b e c om p l et e ly c l o se d
automatically.
To stop in the process of automatic opening
or closing, push the switch once.
Anti-pinch Function
The sunroof and the sun blind will retract to
reduce pinching risks when they contact a
certain rigid obstacle (such as the arm and
head) in their one-button closing or remote
closing process.
Remote Sunroof Opening
Press the unlock button of the remote control
for about 2s, the sun blind and sunroof will
completely be opened automatically.
Sunroof Initialization Learning
The sunroof or the sun blind may lose its one-
button opening or closing function in some
cases, such as replacement of sunroof glass or
motor. In such cases, the sunroof or sun blind
initialization learning is necessary.
Method: Move the sunroof or sun blind to
the completely close position; push the
sunroof switch forward for about 10s or press
the close button of the sun blind for about 10s;
when the operation sound of the sunroof
mechanism is heard, the sunroof or sun blind
initialization learning is completed. If the one-
button opening or closing function still cannot
be recovered after initialization learning,
please drive to the MG Authorised Service
Center for check and repair.
Shutdown Delay Function
Within 30s upon vehicle shutdown, the
sunroof and sun blind can be closed with
buttons but cannot be opened.
Linkage Function
The linkage function of the sunroof and sun blind
enables passengers in the vehicle to see the
sunroof glass position when the sunroof is
opened and to avoid forgetting to close the
sunroof when the passengers leave the vehicle.
When the sunroof sun blind is completed
closed, the sun blind will move the half-open
position along with the sunroof if the sunroof
switch is pushed backward and held. If the
button is released in the long pressing process,
the glass will stop moving immediately, and the
sun blind will move to the half-open position
and then stop.
When the sunroof glass is completely opened,
if the sun blind close button is long pressed,
the glass will be closed along with the sun
blind. If the button is released in long pressing
process, the glass will stop moving, and the sun
blind will stop moving (not reaching the half-
open position) or return to the half-open
position (exceeding the half-open position)
KEYS, DOORS AND WINDOWS
Sun Blind
Press the open or close button of the sun blind
to slide open or close the sun blind. When it
reaches the desired position, release the
button.
Short press the button, and the sun blind can
be opened or closed automatically.
The front part of the sunroof can be tilted.
To tilt open the sunroof, push the sunroof
switch backward when the sunroof is
completely closed, and release the switch
when the sunroof reaches the desired
position. To completely tilt open the sunroof,
push and hold the switch, and then release the
switch when the sunroof stops moving.
You can also push the sunroof switch (short
press) backward once quickly, and the sunroof
will be tilted open automatically.
To close the titled sunroof, push the sunroof
switch forward, and release the switch when
the sunroof reaches the desired position. To
completely close the sunroof, release the
Sunroof Tilting
switch when the sunroof stops moving. You
can also push the sunroof switch (short press)
forward once quickly, and the sunroof will be
closed automatically
Sunroof Sliding
The sunroof can be slided open backward
after it is completely tilted open.
To slide open the sunroof, push the sunroof
switch backward, and release the switch when
the sunroof reaches the desired position. You
can also push the sunroof switch backward
once quickly (short press), and the sunroof
will be slided open automatically.

MG Hector Specifications

General

Brand	MG
Model	Hector
Category	Automobile
Language	English