4544
SEATS AND PROTECTIVE DEVICES
The vehicle is not equipped with a child seat. If
you want to add one, a child seat that is
applicable to ISOFIX “general” type can be
selected. The child seat can only be placed on
the second row seat. The front seat is not
equipped with the anchor system bracket. The
statistical data of accidents show that placing
the child seat on the second row seat can
largely improve the child safety.
For a little child, a child seat shall always
be used. Never hold a child with arms
while riding in the vehicle. Never allow a
child to stand or kneel on a seat or in the
luggage compartment when the vehicle
is running.
Caution
An unfixed child seat may be thrown out
of the vehicle in case of a collision or
emergency stop. The child seat must be
correctly and securely fixed even it is not
used.
Caution
If the child seat is put in a closed
compartment in hot weather, the child
seat temperature will be very high. Make
sure that the child seat temperature is
not very high before putting a child in the
seat. If the child is too small and the seat
belt cannot provide the best protection
for it, please make sure that a proper
child seat is used to provide safety
protection.
Caution
Child Seat
SEATS AND PROTECTIVE DEVICES
Child Restraint System Type
According to AIS072/ECE R44, the child
restraint system can be classified as the
following 5 groups:
Group 0: for child with body weight less than
10 kg.
Group 0+: for child with body weight less
than 13 kg.
Group I: for child with body weight more
than 9 kg and less than 13 kg.
Group II: for child with body weight more
than 15 kg and less than 25 kg.
Group III: for child with body weight more
than 22 kg and less than 36 kg.
Please select a suitable child seat according to
the child body weight and body figure.
For infants under one year old, their bones are
very fragile, and a rearward-facing child seat
shall be used.
ISOFIX
To fix the child seat:
1. The ISOFIX lower fixing point is on the
joint between the second row set
backrest and the seat cushion back. Its
position can be identified through the
label on the lower edge of the backrest.
The left and right seats are equipped with
a set of ISOFIX respectively.
2. Clear up the objects on the seat. Note to
remove the seat belt and seat belt buckle
to avoid affecting accurate fixing of the
child seat.
3. Put the child seat on the second row seat.
The size and configuration range of the
child seat is very wide. Not all child seats
are applicable to your vehicle due to the
effects of the vehicle trim as well as the
s e a t s h a p e a n d s i z e . Y o u h a v e
responsibility to ensure that the child
seat installed matches with your vehicle
and that the child seat can be connected
correctly to the vehicle with the child
seat anchor system. If the child seat does
not match with your vehicle size and the
child body figure or the connection to
your vehicle is incorrect, severe personal
injuries will be caused to the child and
other passengers in the vehicle in case of
a collision.
Caution
To Next Page
Loading...
Need help?
General
