MG Hector User Manual

1918
KEYS, DOORS AND WINDOWS
Internal Liftgate Switch
Press the switch. The liftgate automatically
opens after two prompt tones. When the
liftgate is to be closed, press the switch. The
liftgate automatically closes after two prompt
tones. The locking sound and two flashes of
hazard warning lamp represent that the liftgate
is closed and locked.
Liftgate Closing Switch
In the liftgate open state, press the liftgate
closing switch, as shown in the figure. The
liftgate automatically closes after two prompt
tones. The locking sound and two flashes of
hazard warning lamp represent that the liftgate
is closed and locked.
During liftgate opening or closing, press this
switch shortly. The liftgate will stop at the
present position.
Setting of liftgate opening height: Adjust the
opening height slowly manually after the
liftgate is open. Press this switch for 3s after
adjustment, and hear a prompt tone to end the
setting. The subsequent liftgate opens to this
height to stop.
You can also pull the liftgate to close with
hands. When a certain speed is reached, the
liftgate will enter the electric closing mode.
External Liftgate Switch
Firstly, unlock the vehicle, and press the
switch. The liftgate automatically opens after
two prompt tones. When the liftgate is to be
closed, press the switch. The liftgate
automatically closes after two prompt tones.
The locking sound and two flashes of hazard
warning lamp represent that the liftgate is
closed and locked.
Before driving, please make sure that the
liftgate is closed and locked. When
leaving the vehicle, make sure that the
liftgate is closed and locked, and the
vehicle is locked.
Caution
Kick Type Electric Tailgate*
In the unlocked state of the door, stand behind
the tailgate, use your instep to reach below the
rear license plate position, and then retract it
to complete a correct triggering action. After
the two beeps sound, the tailgate opens or
closes slowly.
When you close the tailgate, you hear a lock
sound and the hazard warning light flashes twice,
indicating that the tailgate is closed and locked.
With the door locked, if you have a key on
your body, you can kick and open and close the
tailgate directly.
Anti-pinch Function of Liftgate
1. During liftgate closing, when any obstacle
(such as finger) touches the anti-pinch
strip in the zone, as shown in Figure ①, it
triggers the anti-pinch function. The
liftgate opens reversely to the preset
stopping point.
For the anti-pinch function of the liftgate,
a better anti-pinch cannot be realized at
every position. The position closer to the
liftgate hinge has a stronger anti-pinch
force. Please keep your finger or other
body parts away from the range of
movement to avoid any personal injury.
Note
Liftgate Antiplay
Before the liftgate is not completely locked, if
the anti-pinch strip is triggered for 3 times,
then the liftgate enters antiplay mode. The
liftgate stops moving, and the switch is invalid.
Please close the liftgate manually.
2. During liftgate closing, when any obstacle
(such as personnel) with stronger
resistance is in the resistance anti-pinch
zone, as shown in Figure ②, the liftgate
enters the anti-pinch mode. The liftgate
opens reversely to the preset stopping
point.
KEYS, DOORS AND WINDOWS
The vehicle should be in locked condition
while washing. The tailgate may open by
underbody jet pressure / bucket flush.
Note

MG Hector Specifications

General

Brand	MG
Model	Hector
Category	Automobile
Language	English