Start time / Finish time
You can delay the start time. The appliance will turn on
automatically at the selected time.
For "Descaling" this is not possible.
Using "Start at" you can enter the time when you would like
the cooking program to start. Using "Ready at" you can enter
the time when you would like the cooking program to end.
The difference between start time and end is the cooking
duration entered plus the preheating time calculated by the
appliance.
This function cannot be used if the oven interior is too hot,
e.g. at the end of a cooking program. "Start at - Ready at"
are not indicated in this case.
Leave the door open to let the oven interior cool off.
Cooking results can be impaired if there is a long delay
between the food being placed in the oven and the start of
cooking.
Setting the Start time / Finish time
^
Select the desired operating mode, temperature and
cooking duration.
^
Touch "Additional settings".
^
After you have entered the settings for the desired
program, select "Start at" or "Ready at" and enter the time
you would like the cooking program to begin or end
^
Confirm with "OK".
Change
^
Touch "Change".
^
Select "Start at" or "Ready at".
Additional functions
44
To Next Page
Loading...
