A functional test is carried out on the appliance at the
factory, making it possible that some water may drip from
the lines into the oven compartment during transport.
Cleaning for the first time
^
Remove any protective wrappings.
Water container and condensate container
^
Take the water and condensate containers out of the
appliance wash in the dishwasher or by hand.
Accessories / Oven interior
^
Remove all accessories from the oven.
^ Clean the cooking pans in this dishwasher or by hand.
The Universal tray and the wire oven rack are PerfectClean
coated and should only be cleaned by hand. Please refer to
the "PerfectClean" section.
^ Clean the universal tray and the wire oven rack with a clean
sponge, liquid dish soap and warm water.
^ Wipe the interior with a damp cloth to remove any dust or
bits of packaging that may be in the oven.
Setting the water hardness level
The Combi Steam Oven is factory set to the "Hard" water
hardness setting. To ensure that it is functioning properly and
descaled at the right time, you must set the local water
hardness. The harder the water, the more often the appliance
will require descaling.
^
Check which water hardness is set, and if necessary, set
the correct water hardness (see "Settings").
Before using for the first time
28
To Next Page
Loading...
Need help?
General
