Before using for the first time
28
Basic settings
The following settings must be made
before starting up for the first time. You
can change these settings again at a
later time (see “Settings”).
Risk of injury caused by hot
surfaces.
The oven gets hot during operation.
For safety reasons, the oven may only
be used when it has been fully
installed.
The oven will switch on automatically
when it is connected to the electricity
supply.
Setting the language
Select the desired language.
If you have selected the wrong
language by mistake, proceed as
described in “Settings – Language”.
Setting the location
Select the required location.
Setting the time
Set the time of day in hours and
minutes.
Confirm withOK.
Completing the commissioning
process
Follow any further instructions in the
display.
The oven is now ready for use.
To Next Page
Loading...
Need help?
General
