Roasting
52
Insert the plug of the food probe into
the socket until you feel it engage.
Close the door.
Select the function or automatic
programme.
Set the temperature and the core
temperature if necessary.
The core temperatures cannot be
changed for the automatic
programmes.
Follow the instructions on the display.
The cooking programme is brought to an
end as soon as the core temperature is
reached.
Risk of injury caused by hot
surfaces.
The food probe can get hot. You
could burn yourself on it.
Wear oven gloves when removing the
food probe from its socket.
Delaying the start of a cooking
programme with food probe
You can set the cooking process to start
at a later time.
Once you have selected a function,
touch the sensor control.
Select Start at.
The finish time can be calculated
approximately because the duration of a
cooking process is about the same,
whether or not the food probe is used.
You cannot set Duration and Finish at
because the total cooking duration is
determined by when the set core
temperature is reached.
Time left display
If the temperature set for a cooking
programme is above 140°C, the
estimated time left will appear in the
display.
The time left is calculated from the
cooking temperature selected, the set
core temperature, and the progress of
the core temperature as it rises.
The time left first shown is an estimate.
As the cooking process continues, the
time left is revised continuously, and a
more accurate figure is shown.
The time left will be deleted if the
cooking or core temperature is changed
or if a different function is selected. If
the door is opened for a longer time, the
time left will be recalculated.
Switching between the time left
display and the core temperature
display
You can switch between the time left
display and the core temperature
display as soon as the time left appears
in the display.
Select the sensor control.
The time left or the core temperature
appears in the display in addition to the
temperature.
To Next Page
Loading...
