Cleaning and care
63
Push the inner pane with the matt
printed side facing downwards into
the plastic strip and place it between
the retainers.
Flip both the glass pane retainers
inwards to close them.
The door is now reassembled.
Fitting the door
Hold the door securely on both sides
and carefully fit it back into the hinge
retainers.
Make sure that you fit the door
straight.
Open the door fully.
If the locking clamps are not locked,
the door could become loose,
resulting in damage.
Always ensure that the locking
clamps are locked after refitting the
door.
To Next Page
Loading...
Need help?
General
