Problem solving guide
66
Many malfunctions and faults that can occur in daily operation can be easily
remedied. You can save time and money in many cases, as you do not need to call
the Miele Customer Service Department.
Information to help you rectify faults yourself can be found at www.miele.com/
service.
The following tables are designed to help you to find the cause of a malfunction or a
fault and to resolve it.
Problem Cause and remedy
The display is dark. You have selected the Time| Display| Off setting. When
the oven is switched off, the display is dark.
As soon as the oven is switched on, the main menu
will appear. If you want the time of day to be
displayed constantly, select the Time| Display| On
setting.
There is no power to the oven.
Check that the oven plug is correctly inserted into
the socket and switched on.
Check whether the circuit breaker has tripped.
Contact a qualified electrician or the Miele
Customer Service Department.
The buzzer does not
sound.
The buzzers are deactivated or set at too low a
volume.
Switch on the buzzers or increase the volume with
the Volume| Buzzer tones setting.
The oven compartment
does not heat up.
Demo mode is active.
You can select menu options in the display and the
sensor controls, but the oven heating does not work.
Deactivate demo mode with the Showroom
programme| Demo mode| Off setting.
System lock appears in
the display when the
oven is switched on.
The system lock has been activated.
Confirm with OK.
Press “OK” for 6 secs will appear.
You can deactivate the system lock for a cooking
process by touching the OKsensor control for at
least 6seconds.
If you want to permanently deactivate the system
lock, select the Safety| System lock | Offsetting.
To Next Page
Loading...
Need help?
General
