Operation
41
Cancelling a cooking
programme
Touch the sensor control for the
selected function or the sensor
control.
When Cancel process appears in the
display, confirm withOK.
The oven compartment heating and
lighting will then switch off. Any cooking
durations set will be deleted.
The main menu will appear.
Pre-heating the oven
The Boosteris used in conjunction with
certain functions to quickly pre-heat the
oven.
It is only necessary to pre-heat the oven
in a few instances.
Most dishes can be placed in the cold
oven to make use of the heat
produced during the heating-up
phase.
Pre-heat the oven when cooking the
following food with the following
functions:
- Dark bread dough as well as beef
sirloin joints and fillet with the Fan
plusand Conventional
heatfunctions
- Cakes and pastries with a short
cooking duration (approx. 30minutes
or less) as well as delicate items (e.g.
sponge) with the Conventional heat
function (without the Booster function)
Booster
The Boosterfunction is used to quickly
pre-heat the oven compartment.
This function is switched on as the
factory default setting for the following
functions (Further| Settings|
Booster| On):
- Fan plus
- Conventional heat
- Auto roast
If you set a temperature above 100°C
and the Boosterfunction is switched on,
a rapid heating-up phase heats the oven
to the set temperature. The top heat/
grill element and the ring heater element
come on together with the fan.
Delicate items (e.g. sponge or
biscuits) will brown too quickly on
the top if the Boosterfunction is used.
Switch off the Boosterfunction for
these items.
Switching off Booster for a cooking
process
Select the Booster| Offsetting before
selecting the desired operating mode.
The Boosterfunction is switched off
during the heating-up phase. Only the
heater elements for the selected
operating mode are used to pre-heat
the oven compartment.
If you then want to restart a cooking
process with the Boosterfunction,
select the Booster| Onsetting to
switch the function on again.