Miele H 7162 BP User Manual

Settings
34
System lock

The system lock prevents the oven
being switched on by mistake.
The minute minder can still be used
when the system lock is active.
The system lock will remain activated
even after a mains outage.
- On
The system lock has been activated.
Before you can use the oven, touch
the OKsensor control for at least
6seconds.
- Off
The system lock is deactivated. You
can use the oven as normal.
Software version
The software version is intended for the
Miele Customer Service Department.
You do not need this information for
domestic use.
Showroom programme
This function enables the oven to be
demonstrated in showrooms without
heating up. This setting is not needed
for domestic use.
Demo mode
If you have demo mode activated,
Demo mode active. The appliance will not
heat up will appear when you switch
the oven on.
- On
Touch the OKsensor control for at
least 4seconds to activate demo
mode.
- Off
Touch the OKsensor control for at
least 4seconds to deactivate demo
mode. You can use the oven as
normal.
Factory default
- Appliance settings
Any settings that have been altered
will be reset to the factory default
settings.
- Recommended temps.
Any recommended temperatures that
have been changed will be reset to the
factory default settings.
Operating hours
Select Further| Operating hours to
query the total number of operating
hours of your oven.

Miele H 7162 BP Specifications

General

Brand	Miele
Model	H 7162 BP
Category	Oven
Language	English