Miele H 7162 BP - Residual heat utilisation; Customising settings; Energy-saving mode

Energy saving tips
38
Residual heat utilisation
- In cooking programmes using
temperatures greater than 140°C and
with cooking durations longer than
30minutes, the temperature can be
turned down to the lowest possible
level about 5minutes before the end
of the cooking programme. The
residual heat in the oven is sufficient
for cooking the food until it is done.
However, never switch the oven off
(see “Warning and safety
instructions”).
- It is best to start the pyrolytic cleaning
programme immediately after a
cooking programme. The residual heat
in the oven will help reduce the
amount of energy required.
Customising settings
 Select Display| QuickTouch| Off for the
control elements to reduce energy
consumption.
 For the oven interior lighting, select
Lighting| Off or “On” for 15 seconds. The
oven interior lighting can be switched
on again at any time by touching
thesensor control.
Energy-saving mode
The oven will switch itself off
automatically to save energy if a
programme is not being run and
controls have not been operated. The
time of day will appear in the display or
the display will remain dark (see
“Settings”).