Settings
32
QuickTouch
Select how the sensor controls should
respond when the oven is switched off:
- On
If you have also selected the Time|
Display| On or Night dimming setting,
the sensor controls will also respond
when the oven is switched off.
- Off
Independently of the Time| Display
setting, the sensor controls only
respond when the oven is switched
on, as well as for a certain amount of
time after switching it off.
Volume
Buzzer tones
If buzzers are switched on, a buzzer will
sound when the set temperature is
reached and at the end of a set time.
Melodies
At the end of a process, a melody will
sound several times in intervals.
The volume of the melody is
represented by a bar with seven
segments.
-
Maximum volume
-
Melody is switched off
Solo tone
At the end of a process, a continuous
tone will sound for a period of time.
The pitch of this continuous tone is
represented by a segment bar.
-
Maximum pitch
-
Minimum pitch
Keypad tone
The volume of the tone that sounds
each time you touch a sensor control is
represented by a bar with seven
segments.
-
Maximum volume
-
Tone is switched off
Welcome melody
The melody that sounds when you
touch the On/Off sensor control can
be switched on or off.
Units
Temperature
You can set the temperature in degrees
Celsius (°C) or degrees Fahrenheit (°F).
Booster
The Boosterfunction is used to quickly
pre-heat the oven compartment.
- On
The Booster function is automatically
switched on during the heating-up
phase of a cooking programme. The
top heat/grill element, ring heating
element and hot air fan pre-heat the
oven compartment to the set
temperature at the same time.
- Off
The Booster function is switched off
during the heating-up phase of a
cooking programme. Only the heating
elements for the selected oven
function are used to pre-heat the oven
compartment.
To Next Page
Loading...
Need help?
General
