Beginning Exam
5-2
5.2 Selecting Exam Mode
If the system is not in the exam mode you want, press <EXAM> to enter the [Exam
Select] menu and then select the exam mode.
The system supports the following exam modes:
Abdomen
Gynecology
Obstetric
Small parts
5.3 Selecting Transducer
For the system connecting two transducers, if the current transducer is not the one you
want, press <Probe> to switch to the other transducer.
5.4 Selecting Image Mode
If the current image mode is not the one you want, press <B>, <M>, <B/B> or <M/B>
to select the image mode.
The system supports the following image modes:
B
M
B/B
M/B
5.5 Adjusting M-mark Position
As entering the M/B mode, you can turn the trackball leftward or rightward to adjust the
position of M-mark.
To adjust the position of M-mark again, follow the steps below.
1 Enter the [M MODE MENU] menu (if no menu is displayed, press <Menu>).
2 In the [M MODE MENU] menu, select [M-Mark].
3 Turn the trackball leftward or rightward to adjust the position of M-mark.
To Next Page
Loading...
Need help?
General
