7-1
7 Cine
This chapter introduces the cine and its operation method.
CAUTION:
Before examining a p
atient, press <Patient> to up
date the p
atient
information and clear the cine memory. Otherwise, the patient
information does not correspond to the patient data and
misdiagnosis may occur.
The system supports only the cine of B images.
Real-time images (including zoomed images) are automatically stored into the cine memory
by the system. They are stored frame by frame and in the sequence of time. After the image is
frozen, images prior to the frozen one can be reviewed. This function is called cine.
The cine must be performed in frozen status. Turning off the system, unfreezing the image or
pressing <Patient> will clear the cine memory.
7.1 Cine Indicator
In the cine, the cine indicator shown in the figure below is displayed on the bottom of screen.
In it, the numbers are the current frame No. and the total number of frames in the cine
memory, and the arrow indicates the review direction.
7.2 Manual Cine and Auto Cine
The cine includes the manual cine and auto cine. The manual cine is the default.
General procedure of cine
Review direction
64
128
Current frame No.
Total number of frames
To Next Page
Loading...
Need help?
General
