10-1
10 Body Mark
This chapter introduces how to add, move and clear the body mark.
WARNING:
Be sure to add correct body mark. Otherwise, misdiagnosis
may occur.
The body mark indicates the body position on which the scan is performed and the transducer
orientation to interpret the image.
10.1 Adding/changing Body Mark
You can add body marks on real-time, frozen and cine images, on opened FRM/CIN files, and
on their zoomed images.
You can add a body mark in any image mode.
In the M/B mode, the body mark is added only on the B image. In the B/B mode, while the
body mark can be added on both windows respectively, it can be added only on the active
window at a time.
To add a body mark on the current image or change the current body mark on the image to
another
1 Press <BodyMark>. The [Body Mark] dialog box pops up and the page corresponding
to the current exam mode is displayed.
To Next Page
Loading...
Need help?
General
