Transducers and Biopsy
12-18
No. Name Description
1
Support of
needle-guided
bracket
Used for installing the needle-guided bracket on the
transducer
2
Groove and tab of
needle-guided
bracket
Respectively matched with the tab and groove of the
transducer
3
Angle adjusting base There are 3 types of angles available to be adjusted
4
Angle shift
sign(40°,50°,60°)
Matched with the biopsy angle (40°,50°,60°)
5
Angle pinch nut Used for fixing the angle lock at a certain angle
6
Angle block
Used for determining the angle of the biopsy; different
specifications of blocks can be used
7
Guiding block
Used for installing biopsy needle; there are five
specifications of guiding blocks for different biopsy needles
8
Specification of
guiding block (14G)
Matched with the corresponding biopsy needle (14G)
9
Needle guide hole Used for installing the biopsy needle
10
Pinch nut of
needle-guided
bracket
Used for locking the
needle-guided bracket and the transducer
To Next Page
Loading...
Need help?
General
