3 - 2 Accutorr 7 Operator’s Manual
3.1.1 Unpacking and Checking
Before unpacking, examine the packing case carefully for signs of damage. If any
damage is detected, contact the carrier or Mindray.
If the packing case is intact, open the package and remove the equipment and
accessories carefully. Check all materials against the packing list and check for any
mechanical damage. Contact Mindray in case of any problem.
• When disposing of the packaging material, be sure to observe the applicable
waste control regulations and keep it out of children’s reach.
• Before use, please verify whether the packages are intact, especially the
packages of single use accessories. In case of any damage, do not apply it to
patients.
• Save the packing case and packaging material as they can be used if the
equipment must be reshipped.
• If your monitor contains the CO
2
module, connect the CO
2
adapter to the CO
2
receptacle soon after you unpack the monitor to avoid losing the CO
2
adapter.
3.1.2 Environmental Requirements
The operating environment of the equipment must meet the requirements specified in
this manual.
The equipment operating environment should be reasonably free from noise, vibration,
dust, corrosive, flammable and explosive substances. To maintain good ventilation, the
equipment should be at least 2 inches (5 cm) away from surrounding objects.
When the equipment is moved from one place to another, condensation may occur as a
result of temperature or humidity difference. In this case, never start the system before
the condensation disappears.
• Make sure that the equipment operating environment meets the
specifications. Otherwise unexpected consequences, e.g. damage to the
equipment, could result.
To Next Page
Loading...
Need help?
General
