12-11
Be sure to perform the pre-operational checks for
the items listed below at the start of each day’s
operation in order to ensure safe and comfortable
driving. If you find anything unusual, you should
have your vehicle inspected at an authorized dealer
before operating it.
1 Before starting the engine
(Open the front panel.)
Pre-operational checks
Coolant level
Check that the coolant level is between the
“FULL” and “LOW” marks on the reservoir
tank.
P. 1 2 - 4 8
Clutch fluid level
<Manual transmission vehicle>
Check that the clutch fluid level is between
the “H” and “L” marks on the reservoir tank.
P. 1 2 - 3 4
Windshield washer fluid level
Confirm that the windshield washer fluid
level is visible within the transparent hose
(see figure).
P. 1 2 - 7 9
FKFM.book Page 11 Wednesday, January 28, 2009 9:21 AM
To Next Page
Loading...
Need help?
General
