12-59
2 Adjustment
2.1 Fan belt
1. Loosen both the upper and lower alternator
mounting bolts and nut .
2. Using an iron bar or similar tool, pry the alter-
nator outward to adjust the tension of the belt.
3. After the belt has been adjusted to the proper
tension, tighten the mounting bolts and nut.
2.2 Air conditioner compressor belt
After slightly loosening pulley mounting nut , turn
adjusting bolt to adjust tension. Turn it clockwise
to increase tension. After performing the adjust-
ment, fully tighten the pulley mounting nut.
The steering wheel is a safety-critical part of the
vehicle. If an inspection reveals any abnormality,
contact an authorized dealer and have the abnor-
mality rectified before you again drive the vehicle.
Driving the vehicle with the abnormality unrectified
could result in a serious accident.
Steering wheel – check
WARNING
Perform the checks in a safe place that pro-
vides good visibility all around. During the
checks, be sufficiently attentive to surround-
ing traffic conditions.
Z17772
Z12108
FKFM.book Page 59 Wednesday, January 28, 2009 9:21 AM
To Next Page
Loading...
Need help?
General
