5-15
• The shift pattern is inscribed on gearshift lever.
• When the gearshift lever is placed in the reverse
“R” position, the backup lamps light up and the
backup buzzer sounds simultaneously.
<All models except FM65F with automatic transmis-
sion>
Please refer to the attached Allison Operator’s Man-
ual for instructions not covered in this Owner’s Man-
ual.
Range selector lever
Overdrive switch
Power mode switch
Overdrive off indicator lamp
Transmission fluid temperature warning lamp
Transmission warning lamp
Shift lock release button
1 How to use the range selector lever
Allison automatic transmission
1000RDS/2200RDS
WARNING
• When shifting from the “P” or “N” position
to other positions, be sure to keep the
brake pedal depressed or set the parking
brake.
• Do not move the range selector lever to
the “D” or “R” position when the engine
speed is high during engine warm up and
during DPF regeneration, operation of the
air conditioner, or depression of the accel-
erator pedal. Shifting under this condition
is highly dangerous as the vehicle will
jerk.
Z17271
FKFM.book Page 15 Wednesday, January 28, 2009 9:21 AM
To Next Page
Loading...
Need help?
General
