5-29
Use the brightness control switch to adjust the
intensity of the meter cluster illumination lamps.
With the meter cluster lamps on, press and hold
either side of the switch to set the lamps to your
desired brightness, then release the switch.
To brighten: Press upper side of the switch
To darken: Press lower side of the switch
Cruise control memorizes any desired speed above
the speeds given below and maintains that speed
automatically without operating the accelerator
pedal. It is especially useful for freeway driving that
involves almost no chances of pulling over and
stopping.
NOTE:
For the sake of safety, do not use the cruise control
in the following driving conditions:
• In heavy traffic which does not allow sufficient
vehicle to vehicle distance
• On roads with sharp turns or poor visibility
• On icy, snow-covered, or otherwise slippery
roads
• Steep downhill road
The vehicle speed may become higher than the set
speed on a steep downhill road. Stop using the
cruise control if this occurs.
Brightness control switch
Cruise control
Speeds above which cruise
control functions
Manual transmis-
sion vehicle
Approx. 40 km/h (25 mph)
Automatic trans-
mission vehicle
Approx. 57 km/h (35 mph)
Bright
Dim
Z17281
FKFM.book Page 29 Wednesday, January 28, 2009 9:21 AM
To Next Page
Loading...
Need help?
General
