5-17
2 Overdrive switch
Pressing the switch to the down position will turn it
ON and pressing it again to the up position will turn
it OFF.
The indicator lamp will light up when the switch
is pressed to the OFF position.
ON: Place the switch in this position for normal
driving. Make sure the switch is in this posi-
tion during high-speed driving. When the
overdrive switch is ON, the transmission
will operate in the 5-speed mode, which
makes driving more economical.
OFF: Use this position for downhill driving requir-
ing engine braking and long uphill driving.
The transmission will operate in the 4-
speed mode.
3 Power mode switch
A choice of two driving modes is available to suit the
road conditions and the load being carried.
Press the ON side of this switch to activate the
power mode. Pressing the OFF side of the switch
will cause the transmission to revert to the normal
mode.
The lamp inside the switch will light up when the
power mode is selected.
• Power mode
This is used when a powerful driving force is
needed, such as in mountainous areas, when
carrying heavy loads, and when overtaking
safely on expressways.
• Normal mode
This is used for normal driving, and provides a
smoother, quieter, and more economical ride.
OFF ON
Z17272
Z17273
FKFM.book Page 17 Wednesday, January 28, 2009 9:21 AM
To Next Page
Loading...
Need help?
General
