101
TO PLACE A CALL ON EXCLUSIVE
HOLD
STEP 1: Press key twice. The line key appear-
ance indicates interrupted wink.
To Retrieve
STEP 1: Lift the handset or press key.
STEP 2: Press the held line key. Use the handset to
converse.
If unanswered
STEP 1: After preprogrammed time, Automatic Recall
is initiated.
STEP 2: Visual and audible signal (rapid flash and ring
burst) is sent to the station which placed call
on Exclusive Hold. Recall shows as a flash-
ing green LED on your phone, and solid red
on other phones with same line.
TO TRANSFER A CALL
STEP 1: After conversing, ask the other party to hold.
STEP 2: Press key. Receive an interrupted
dial tone.
STEP 3: Dial destination station’s extension, hang up
or wait for answer.
STEP 4: If transferring party hangs up, that station’s
number appears in the center of recipient’s
display.
Note:
If held line key appears on other stations, LED
remains steadily lit red.
Note:
Only the terminal that set Exclusive Hold option
can retrieve the call.
Mic >>>
Held Station Number
2001
E_HOLD
1:25 PM MON 11 MAY 2015
Note:
Exclusive Hold excludes any other phone from
picking up your held call. Exclusive Hold shows
as a flashing green LED on your phone. The
same line on other phones appears as a solid red
LED.
Mic >>>
1:25 PM MON 11 MAY 2015
TRANSFER
Mic >>>
1:25 PM MON 11 MAY 2015
TRANSFER 2001
or trunk number
Transferred station
Mic >>>
1:25 PM MON 11 MAY 2015
TRANSFER 2000 DDD 3
Transferring station
To Next Page
Loading...
Need help?
General