129
TO EDIT THE REGISTERED DATA
To Enter the Phone Number
STEP 1: Locate the cursor (underscore) with LEFT/
RIGHT soft key (these soft keys are dis-
played pressing >>> soft key), or pressing
/ key.
STEP 2: Enter the desired phone number.
To Enter Hooking
STEP 1: Press the Hook soft key (this soft keys is dis-
played pressing >>> soft key twice).
STEP 2: Hooking is indicated as “!” on the LCD.
Note:
During the registration operation, pressing any
other key (Exit, SPD Set, or Cnl) cancels the set-
ting. In that case, the terminal operates in accor-
dance with the pressed key.
Note:
When you receive an incoming call on the
accommodated line while programming the One-
Touch Speed Calling key, you can continue with
the programming without answering the call.
However, if you answer the call, the conversation
will be started and the registration operation will
be canceled.
Note:
A new entry overwrites the previously saved
phone number (the existing number temporarily
displays when you try to set a new number).
Note:
If the entered number exceeds 24 digits, the dig-
its following the 24th digit are displayed on the
upper row of LCD. Phone number can be entered
up to 32 digits.
Note:
The Hook soft key can be put only at the begin-
ning of a number, and so “Hooking” sign (!) dis-
plays only before entering any number.
! _
Pause Voice Delete >>>
To Next Page
Loading...
Need help?
General