138
TO ANSWER A CAMPED-ON CALL
STEP 1: While engaged in a call, receive the camp-on
indication (one short tone burst). LED of
key flashes.
STEP 2: Press key. Call in progress is placed
on hold.
STEP 3: Connection to camped-on call is established.
STEP 4: Press key to return to original call.
Camped-on call is placed on hold.
STEP 5: By repeating these steps, it is possible to al-
ternate between calls. The display indicates
connected station or trunk at any given time.
CALL WAITING - ORIGINATING
To Program Call Waiting Key (On One-
Touch Speed Calling Key)
STEP 1: Press key.
STEP 2: Press the desired One-Touch Speed Call-
ing key.
STEP 3: Press key, “!” appears on the LCD.
STEP 4: Dial the “Call Waiting” feature access code.
STEP 5: Press key.
To Activate Call Waiting – Originating
STEP 1: Dial the desired station number, receive a
busy tone.
STEP 2: Press the CALL WAITING key.
STEP 3: Receive a special ringback tone.
CAMP ON DDD 3
1:25 PM MON 11 MAY 2015
Note:
To program a hook switch for transfer or feature
activation, press as first digit. “!” dis-
plays on LCD.
To Next Page
Loading...
Need help?
General