161
CALL REDIRECT
Example:
Station A views on the terminal display the Station
Number or Caller ID of an Incoming Call and imme-
diately redirects the call by pressing a Function
Key. The destination of the Call Redirect will be the
Call Forwarding-Don’t Answer Destination or the
Recall Destination if the call is transferred without
Call Forwarding-Don’t Answer being set at the sta-
tion.
Call Redirect To Call Forward-Don’t
Answer Destination
STEP 1: Station A sets Call Forward-Don’t Answer to
Station B.
STEP 2: Station C dials Station A, it rings and displays
Station C’s number on the display.
STEP 3: Station A presses the Call Redirect Key.
STEP 4: REDIRECT is displayed on the LCD, and the
call immediately forwards to Station B.
Using Soft Key
STEP 1: Station A sets Call Forward-Don’t Answer to
Station B.
STEP 2: Station C dials Station A, it rings and displays
Station C’s number on the display.
STEP 3: Station A presses the REDIR soft key.
STEP 4: REDIRECT is displayed on the LCD, and the
call immediately forwards to Station B.
- OR -
Call Redirect to Recall Destination When Call
Is Transferred Without Call Forwarding-Don't
Answer Being Set
STEP 1: Station B calls Station C.
STEP 2: Station C answers the call and transfers it to
Station A and then releases the call.
STEP 3: Station A rings.
STEP 4: Station A presses the Call Redirect Key.
STEP 5: REDIRECTING is displayed on Station A and
the call immediately recalls to Station C.
Note:
This feature is available in North America only.
To Next Page
Loading...
Need help?
General