NetComm Wireless AC1200 WiFi Gigabit Router with Voice
Interfaces
Figure 2 - Interfaces
Connection point for the included power adapter. Connect the power supply here.
Turns the router on or off.
Connect a compatible 3G/4G USB modem here.
Activate the WiFi WPS PBC function.
a) Hold for 1-3 seconds then release to trigger the 2.4GHz WPS PBC
b) Hold for 4-6 seconds then release to trigger the 5GHz WPS PBC
c) Hold for 15 seconds then release to reset the router to factory default settings.
Gigabit Ethernet LAN ports. Connect your Ethernet based devices to one of these ports for high-speed
internet access.
Gigabit WAN port for connection to a WAN network.
Phone port for a standard PSTN analogue telephone handset. Connect a phone to this port to make use
of a VoIP service.
To Next Page
Loading...
Need help?
General
