NetComm Wireless AC1200 WiFi Gigabit Router with Voice
Call features
The Call features pages enable you to configure settings for features such as call waiting, call forwarding and caller ID.
Call forward
The Call forward page enables you to configure the type of call forwarding you would like to use and the SIP address to which any
such calls should be forwarded.
Figure 57 - Call forward
You can select from the following call forwarding conditions:
Always
Busy
No Answer
Disable
Select the type of Call Forwarding you would like to use.
Call forward phone number
Enter the phone number to which VoIP calls should be forwarded.
Table 22 - Call forwarding
Click Save to save your settings.
Note: Additional charges may apply when calls are forwarded by your VoIP service provider.
DND settings
The DND Setting page enables you to configure Do Not Disturb (DND) mode. This will prevent calls coming through to your phone.
Figure 58 - DND settings
Enable or Disable the DND feature.
Table 23 - DND settings
Click Save to save your settings.
To Next Page
Loading...
Need help?
General
