NETGEAR GSS116E User Manual

Network Settings
29
ProSAFE 8-Port and 16-Port Gigabit Web Managed Click Switch
5. Select System > LAG > LAG Membership.
6. In the LAG ID menu, select the LAG ID.
7. Select the ports for the LAG.
8. Click the Apply button.
Your settings are saved.
Use the ProSAFE Plus Utility to Specify LAG Membership
 To specify LAG membership:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
of
f-network using an Ethernet cable.
2. Double-click the ProSAFE Plus Utility icon.
The configuration home page displays a list of Web Managed switches that it discovers
on the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPL
Y button.
You are asked to enter the password for the switch.
5. Enter the switch’
s password in the password field.
The switch’s default password is password.
The Switch Status page displays.
6. Select System > LAG > LAG Membership.
7. In the LAG ID menu, select the LAG ID.

NETGEAR GSS116E Specifications

General

Brand	NETGEAR
Model	GSS116E
Category	Switch
Language	English