Manage the Switch
72
ProSAFE 8-Port and 16-Port Gigabit Web Managed Click Switch
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Double-click the ProSAFE Plus Utility icon.
The configuration home page displays a list of Web Managed switches that it discovers
on the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Status page displays.
6. Select Maintenance > Restore Configuration.
The Restore Configuration page displays.
7. Click the BROWSE button.
8. Find and select the configuration file.
9. Click the APPLY button.
The saved configuration is restored to the switch. The switch reboots to load the restored
configuration.
Restore Factory Default Settings
You can return the switch to its factory settings.
Use Browser-Based Access to Restore Factory Settings
To restore factory settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web
Browser on page 14.
The login window opens.
To Next Page
Loading...
Need help?
General
