Menu 4 - My system
OVERVIEW
4.1 - Operating mode
4.2.2 - Solar electricity
1
4.2 - Plus functions
4.2.3 - SG Ready
4.2.5 - Smart Price Adaption™
4.3 - Profiles
1
4.4 - Weather control
4.5 - Away mode
4.6 - Smart Energy Source™
4.7.1 - Variable electricity price4.7 - Energy price
4.7.3 - Shunt-controlled additional heat
4.7.4 - Step-controlled additional heat
4.7.6 - External additional heat
4.8 - Time and date
4.9 - Language
4.10 - Country
4.11.1 - Installer details4.11 - Tools
4.11.2 - Sound when pressing button
4.11.3 - Fan de-icing
1
4.11.4 - Home screen
4.30.4 - Fact. settings user4.30 - Advanced
1
Consult the accessory’s Installer Manual.
MENU 4.1 - OPERATING MODE
Operating mode
Alternative: Auto, Manual, Add. heat only
Manual
Options: Compressor, Additional heat, Heating, Cooling
Add. heat only
Alternative: Heating
The operating mode for VVM S320 is normally set to "Auto".
It is also possible to select operating mode "Add. heat only".
Select "Manual" to choose which functions are to be activ-
ated.
If "Manual" or "Add. heat only" is selected, selectable options
are shown further down. Tick the functions you want to ac-
tivate.
Operating mode "Auto"
In this operating mode, VVM S320 automatically selects
which functions are permitted.
Operating mode "Manual"
In this operating mode you can select what functions are
permitted.
"Compressor" is the unit that produces heating and hot
water for the home. You cannot deselect "compressor" in
manual mode.
"Additional heat" is the unit that helps the compressor to
heat the home and/or the hot water when it cannot manage
the entire requirement alone.
"Heating" means you obtain heating in the home. You can
deselect the function when you do not wish to have the
heating on.
Caution
If you deselect "addition" it may mean that insuffi-
cient hot water and/or heating in the accommod-
ation is achieved.
Operating mode "Add. heat only"
In this operating mode the compressor is not active, only
additional heat is used.
Caution
If you choose mode "Add. heat only" the com-
pressor is deselected and there is a higher operat-
ing cost.
Caution
You should not change from additional heat only
if you do not have a heat pump connected (see
menu 7.3.1 "Configure").
45Chapter 9 | Control – MenusNIBE VVM S320
To Next Page
Loading...
Need help?
General
