Detailed information about the accessories and complete
accessories list available at nibe.eu.
Not all accessories are available on all markets.
ACTIVE COOLING ACS 310*
ACS 310 is an accessory that enables VVM S320 to control the
production of cooling.
Part no. 067 248
*The accessory requires that NIBE air/water heat pump is installed.
ENERGY MEASUREMENT KIT EMK 300
This accessory is installed externally and used to measure the
amount of energy that is supplied for the pool, hot water, heating
and cooling in the building.
Part no. 067 314
ENERGY MEASUREMENT KIT EMK 500
This accessory is installed externally and used to measure the
amount of energy that is supplied for the pool, hot water, heating
and cooling in the building.
Part no. 067 178
EXTERNAL ELECTRIC ADDITIONAL HEAT ELK
ELK 8
Electric heater
8 kW, 1 x 230 V
Part no. 069 026
ELK 5
Electric heater
5 kW, 1 x 230 V
Part no. 069 025
ELK 15
15 kW, 3 x 400 V
Part no. 069 022
EXTRA SHUNT GROUP ECS 40/ECS 41
This accessory is used when VVM S320 is installed in houses with
two or more different heating systems that require different supply
temperatures.
ECS 41 (approx.
80-250 m²)
Part no 067 288
ECS 40 (Max 80 m²)
Part no 067 287
HUMIDITY SENSOR HTS 40
This accessory is used to show and regulate humidity and temper-
atures during both heating and cooling operation.
Part no. 067 538
EXHAUST AIR HEAT PUMP S135*
S135 is an exhaust air heap pump specially designed to combine
the recovery of mechanical exhaust air with an air/water heat
pump. Indoor module/control module controls S135.
Part no. 066 161
*The accessory requires that NIBE air/water heat pump is installed.
HRV UNIT ERS
This accessory is used to supply the accommodation with
energy that has been recovered from the ventilation air. The
unit ventilates the house and heats the supply air as neces-
sary.
ERS 20-250
1
Part no. 066 068
ERS S10-400
1
Part no. 066 163
ERS 30-400
1
Part no. 066 165
ERS S40-350
Part no. 066 166
1
A preheater may be required.
BASE EXTENSION EF 45
This accessory is used to create a larger connection area under
VVM S320.
Part no. 067 152
AUXILIARY RELAY HR 10
Auxiliary relay HR 10 is used to control external 1 to 3 phase loads
such as oil burners, immersion heaters and pumps.
Part no 067 309
COMMUNICATION MODULE FOR SOLAR
ELECTRICITY EME 20
EME 20 is used to enable communication and control between in-
verters for solar cells from NIBE and VVM S320.
Part no. 057 188
POOL HEATING POOL 310*
POOL 310 is an accessory that enables pool heating with VVM S320.
Part no. 067 247
*The accessory requires that NIBE air/water heat pump is installed.
ROOM UNIT RMU S40
The room unit is an accessory with a built-in room sensor, which
allows the control and monitoring of VVM S320 to be carried out
in a different part of your home to where it is located.
Part no. 067 650
SOLAR PACKAGE NIBE PV
NIBE PV is a modular system comprising solar panels, assembly
parts and inverters, which is used to produce your own electricity.
ACCESSORY CARD AXC 40
An accessory card is required if step controlled addition (e.g. ex-
ternal electric boiler) or if shunt controlled addition (e.g.
wood/oil/gas/pellet boiler) is to be connected to VVM S320.
An accessory card is also required if for example an external circu-
lation pump is connected to VVM S320 at the same time that the
buzzer alarm is activated.
Part no. 067 060
63Chapter 12 | AccessoriesNIBE VVM S320
Accessories
To Next Page
Loading...
Need help?
General
