72
Specifications
Model name
Optical system
Illumination
Focusing mechanism
Eyepiece
Input ratings
Power cable
Operating environment
Storage environment
ECLIPSE LV150, ECLIPSE LV150A
CFI60 optical system (infinity-corrected CF optical system)
Epi-illumination system: The power source for the lamp, NCB11, ND4, and ND16 are
built-in. (exchangeable)
Specified illuminator: LV-UEPI illuminator or LV-UEPI2 illuminator
Lamp ratings: 12 V, 50 W halogen lamp
Specified lamp: LV-HL50W 12V 50W longlife halogen lamp
Specified lamphouse: LV-LH50PC precentered lamphouse
Manual operation type single axis coarse/fine focus knob mechanism (left side with
coarse/fine focus, right side with coarse focus, calibration marking for fine focus: 1 µm/
marking)
Stroke: 30 mm, with coarse focus stopper mechanism
Coarse focus knob: 14 mm/revolution
Fine focus knob: 0.1 mm/revolution
10x, field number: 22, 25
Input voltage: 100 to 240 VAC ±10% 50/60 Hz
Rated current: 1.2 A max.
When the supply voltage is 100 V to 120 V:
UL Listed detachable cord set, 3 conductor grounding Type
SVT, No.18 AWG, 3 m long maximum, rated at 125 V AC
minimum.
When the supply voltage is 220 V to 240 V:
Approved according to EU/EN standards, 3 conductor
grounding Type H05VV-F, 3 m long maximum, rated at 250 V
AC minimum.
Temperature: 0°C to +40°C
Relative humidity: 85% RH max. (no condensation)
Altitude: 2000 m max.
Pollution degree: Degree 2
Installation category: Category II
Electric shock protection class: Class 1
Indoor use only
Temperature: -20°C to +60°C
Relative humidity: 90% RH max. (no condensation)
To Next Page
Loading...
Need help?
General
