Nokia 7368 ISAM ONT G-240W-J User Manual

Configure a G-240W-J indoor ONT 7368 ISAM ONT G-240W-J Product Guide
132 3FE-48009-AAAA-TCZZA Issue: 01
Procedure 34 Access control configuration
This procedure describes how to configure the access control level (ACL).
Note 1 — ACL takes precedence over the firewall policy.
Note 2 — The trusted network object will be shared for all WAN connections;
it is not applied individually to a WAN connection.
1 Select Security > Access Control from the top-level menu in the GPON Home Gateway
window, as shown in Figure 53.
Figure 53 Access Control window
Table 45 describes the fields in the Access Control window.
Table 45 Access control parameters
Field
Description
WAN
Choose a connection from the drop-down menu
(1 of 2)
Field
Description
Trusted Network Enable
Click the checkbox to enable or disable
ICMP, SSH, HTTP, TR-069
Select an access control level for each protocol:
WAN side: Allow, Deny, or Trusted Network Only
LAN side: Allow or Deny

Nokia 7368 ISAM ONT G-240W-J Specifications

General

Brand	Nokia
Model	7368 ISAM ONT G-240W-J
Category	Touch terminals
Language	English