ANSI CPE safety guidelines 7368 ISAM ONT G-240W-J Product Guide
20 3FE-48009-AAAA-TCZZA Issue: 01
in conjunction with any other antenna or transmitter. End-users and installers must
be provided with antenna installation instructions and consider removing the no-
collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1 this device may not cause harmful interference, and
2 this device must accept any interference received, including interference that
may cause undesired operation.
Caution — Any changes or modifications not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment.
2.2.5 Resistibility requirements compliance
The customer premises equipment complies with the requirements of ITU
Recommendation K.21 for resistibility of telecommunication equipment installed in
customer premises to overvoltage and overcurrents.
2.3 Electrical safety guidelines
This section provides the electrical safety guidelines for the customer premises
equipment.
G-240W-J devices are compliant with the following standards
• IEC-62368-1
• UL-62368-1
Note — The devices comply with the U.S. National Electrical
Code. However, local electrical authorities have jurisdiction when
there are differences between the local and U.S. standards.
To Next Page
Loading...
Need help?
General
