Automatic redial — Set your device to make a maximum of 10 attempts to connect
the call after an unsuccessful call attempt. To stop automatic redialling, press the
end key.
Show call duration — Display the length of a call during the call.
Summary after call — Display the length of a call after the call.
Speed dialling — Activate speed dialling.
Anykey answer — Activate anykey answer.
Line in use — This setting (network service) is shown only if the SIM card supports
two subscriber numbers, that is, two phone lines. Select which phone line you want
to use for making calls and sending text messages. Calls on both lines can be
answered irrespective of the selected line. If you select Line 2 and have not
subscribed to this network service, you are not able to make calls. When line 2 is
selected,
is displayed in the home screen.
Line change — Prevent line selection (network service), if supported by your SIM card.
To change this setting, you need the PIN2 code.
Network settings
Select
> Settings and Settings > Phone > Network.
To select the network mode, select Network mode > Dual mode, UMTS, or GSM. In
dual mode, the device switches automatically between networks.
Tip: Selecting UMTS enables faster data transfer, but may increase the demand on
battery power and reduce the battery life. In regions close to both GSM and UMTS
networks, selecting Dual mode may cause constant jumping between the two
networks, which also increases the demand on battery power.
To select the operator, select Operator selection > Manual to select from available
networks, or Automatic to set the device to select the network automatically.
To set the device to indicate when it is used in a microcellular network (MCN), select
Cell info display > On.
Contacts
Stay connected with your online friends
You can synchronise the contact information on your device with contacts you have
on Facebook. You can also create a new Facebook account directly from your device.
Contacts 33
To Next Page
Loading...
Need help?
General
