Location information
You can automatically add capture location information to the file details of the
captured material. For example, in the Photos application, you can then view the
location where an image was captured.
Select
> Camera.
Add location information to all captured material
Select Options > Settings > Show GPS info > On. The location information is
available only for images captured with the main camera.
It may take several minutes to obtain the coordinates of your location. The availability
and quality of GPS signals may be affected by your location, buildings, natural
obstacles, and weather conditions. If you share a file that includes location
information, also the location information is shared, and your location may be visible
to third parties viewing the file. The device requires network services to acquire
location information.
Location information indicators:
— Location information unavailable. GPS stays active in the background for several
minutes. If a satellite connection is made and the indicator changes to
within that
time, all the images captured and video clips recorded during that time are tagged
based on the received GPS positioning information.
— Location information is available. Location information is added to the file
details.
Files with location information are indicated with
in the Photos application.
Flash and video light
The camera of your device has an LED flash for low light conditions.
From the active toolbar, select one of the following flash modes:
Automatic,
On, Reduce red, and Off.
Avoid touching the flash LEDs. The LEDs may get hot after prolonged usage.
Keep a safe distance when using the flash. Do not use the flash on people or animals
at close range. Do not cover the flash while taking a photo.
Increase light levels when recording video in low light
From the active toolbar, select Switch video light onand start recording video.
Camera 81
To Next Page
Loading...
Need help?
General
